Frequently Asked Questions

Can Hepflex Waste be connected to solvent weld systems?

YES - HepFlex Waste spigot connectors are supplied for solvent weld, to ensure joint integrity.

How are the spigot connectors joined to the flexible pipe?

The tapered end of the Hepflex Waste spigot has to be solvent welded into the Hepflex Waste pipe.

How tightly can HepFlex Waste be bent?

It is recommended that HepFlex Waste pipe is not bent to more than four times diameter when installed?

Can long lengths of HepFlex Waste be used?

HepFlex Waste pipe is not recommended for runs longer than 1m. Any length of HepFlex Waste pipe should be clipped or fully supported to ensure the pipe does not sag and the required fall is achieved.

Which end of the fitting goes into the HepFlex Waste pipe?

The tapered spigot is solvent welded into the HepFlex Waste pipe. The parallel spigot does not fit into the HepFlex Waste pipe.